This is the same material family that the cover of a golf ball is made from. The material can be stretched and returned to shape. Pass-throughs on targets are no problem. Great adhesion when using the application methods (below).
Weight: 7.0 +/-0.1 Grains
Height: .55 Inches
Length: 2.25 Inches
40pk
Application Method
Clean the arrow shaft or wrap with a clean, dry paper towel.
Place Super Sabre in the fletching jig clamp.2.5 degree helicalis recommended as a starting point.
Clean Sabre base with one of 2 methods:
Clean the base thoroughly using 70% isopropyl alcohol wipe or primer pen. Rewet alcohol wipe with 70% isopropyl alcohol if it dries.
Wipe base of vane with a DRY paper towel 3-4 times until you feel the friction increase. This means all the alcohol is gone
Alternatively use a primer pen on the base.
Apply a very thin continuous bead ofMaxi-Cure(recommended) to the base.
Using press the vane down holding it securely for 10 sec. (or recommended time on adhesive).
Unclamp the vane and wipe excess glue from around the base of the vane.